Main Unit |
Power supply |
100–240 V AC, 50/60 Hz |
Power consumption |
485 W (0.3 W with STANDBY MODE set to ECO*1, 4 W with STANDBY MODE set to NORMAL, 34 W with in STANDBY MODE of Audio Setting set to on.) |
Optical system |
Dichroic mirror separation/prism synthesis system |
LCD panel |
Panel size |
19.0 mm (0.76 inches) diagonal (16:10 aspect ratio) |
Display method |
Transparent LCD panel (¡¿ 3, R/G/B) |
Pixels |
1,024,000 (1,280 ¡¿ 800) ¡¿ 3, total of 3,072,000 pixels |
Pixel configuration |
Stripe |
Lens |
Powered zoom/focus lens (1.7–2.8:1), F 1.7–2.3, f 26.9–45.4 mm Optional powered zoom/focus lenses and fixed-focus lens |
Lamp |
335 W UHM lamp |
Screen size |
1.02–10.16 m (40–400 inches), 16:10 aspect ratio |
Brightness*2 |
5,000 lumens (LAMP POWER: AUTO/NORMAL, Dynamic mode, Standard lens) |
Center-to-corner uniformity*2 |
90% |
Contrast*2 |
2,000:1 (full on / full off, LAMP POWER: AUTO, Iris on, Dynamic mode) |
Resolution |
1,280 x 800 pixels |
Scanning frequency |
DisplayPort/HDMI/DVI-D |
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 25 MHz–162 MHz (VGA: 640 ¡¿ 480 pixels to WUXGA: 1,920 ¡¿ 1,200 pixels, VESA CVT-RB compliant, compatible with HDCP) |
RGB |
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: up to 162 MHz |
YPBPR (YCBCR) |
480i (525i): fH 15.73 kHz; fV 59.94 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz, 1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz, 1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz, 1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz, 1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz, 1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz, |
Video/YC |
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
Optical axis shift |
Vertical: ¡¾60% (powered), horizontal: ¡¾10% (powered) NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21. |
Keystone correction range |
Vertical: ¡¾40¡Æ (with vertical correction only) Horizontal: ¡¾30¡Æ (with horizontal correction only) |
Installation |
Ceiling/floor, front/rear |
Built-in speaker |
Size |
3.7 cm (1-15/32 inches) (round) ¡¿ 1 |
Output power |
10 W (monaural) |
Terminals |
HDMI IN |
HDMI 19-pin x 1, Deep Color, HDCP compatible 480i(525i)*3, 576i(625i)*3, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p VGA (640 x 400)–WUXGA*4 (1,920 x 1,200) Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
DVI-D IN |
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compati- ble with single link only 480i(525i)*3, 576i(625i)*3, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p VGA (640 x 400)–WUXGA*4 (1,920 x 1,200) |
RGB1 IN |
RGB1 IN |
D-sub HD 15-pin (female) x 1 |
R, G, B |
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative) |
Y, PB (CB), PR (CR) |
Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
RGB2 IN |
RGB2 IN |
BNC x 5 (RGB/YPBPR/YCBCR x 1) |
R, G, B |
R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative) NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
Y, PB (CB), PR (CR) |
Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms |
S-Video IN |
Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms |
VIDEO IN |
PIN Jack x 1, 1.0 Vp-p, 75 ohms |
MONITOR OUT |
D-sub HD 15-pin (female) x 1 R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative) Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms |
AUDIO IN |
M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more PIN Jack (L, R) x 2, 0.5 Vrms, input impedance: 22 kilohms or more |
VARIABLE AUDIO OUT |
M3 (L, R) x 1 (monitor out: 0 – 2.0 Vrms, variable) |
SERIAL IN |
D-sub 9-pin (female) x 1, for external control (RS-232C compliant) |
REMOTE 1 IN |
M3 jack x 1 for wired remote control |
REMOTE 2 IN |
D-sub 9-pin (female) x 1, for external control (parallel) |
LAN/DIGITAL LINK |
RJ-45 x 1 (for network connection, 10Base-T, 100Base-TX, compliant with PJLink¢â |
Power cord length |
3.0 m (9 ft 10 in) |
Cabinet materials |
Molded plastic |
Dimensions (W x H x D) |
530 x 177*5 x 445 mm (20-7/8 x 6-31/32*5 x 17-17/32 inches) (with supplied lens) |
Weight*6 |
Approx. 10.6 kg (23.4 lbs) (with supplied lens) |
Operation noise*2 |
35 dB (LAMP POWER: NORMAL) 29 dB (LAMP POWER: ECO) |
Operating temperature |
0–45 ¡ÆC*7 (32–113 ¡ÆF)*7 |
Operating humidity |
10%–80% (no condensation) |
Remote Control Unit |
Power supply |
3 V DC (R03/LR03/AAA type battery x 2) |
Operation range*8 |
Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor |
Dimensions (W x H x D) |
48 x 145 x 27 mm (1-7/8 x 5-23/32 x 1-1/16 inches) |
Weight |
Approx. 102 g (3.6 oz) (including batteries) |
Supplied accessories |
Power cord (including power cord holder) (x 1) Wireless/wireled remote control unit (x 1) Batteries for remote control (AAA/R03/LR03 type x 2) Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) (x 1) |